bullerman

I ordered me two .015 shims, one .030 shim, one chain break pin, several snap rings and various washers. You could put everything in a...

Thanks for the information. I don't have any shims but I will order some in different thickness. Thought that's what it would take...

Installing the clutch. After I put the drum on and installed the bearing I installed the washer then went to put the snap ring on. To...

I agree. I think we should all have to run a governor but according to our track rules you don't have to. They checked us several...

Thanks. Didn't know for sure.

So Co. If you ran in the Box Stock class would you run a governor if you don't have to. I do run mine but I am beginning to wonder if...

I usually run a 14 driver. I did find out you can use the regular snap ring with it. Is the Stinger mounted with end play like the...

On the Stinger clutch can you use a regular snap ring and snap ring pliers for the driver. I have never like those spiral type snap...

I will call him later then. Thanks

Ran my Hillard clutch with Bully conversion this season. I used to send my Bully to Martinbuilt every year at the end of the season...

Yes that is what I did. My first motor i backed out on the throttle stop screw only. I was actually over 5500 on the stand. I tried...

So basically whatever size track i am on i want t 4900 or so to be the high rpm on my tach. I have been looking for someone to explain...

We run the Box Stock class. 5500 rpm on stand rule. We can take governor off, tie it back or run the governor. I am running the...

Picture didn't post. Can't understand why it won't post one picture. Says file is too large.

Going to post two pictures. One in this post and one in the next one. Won't let me post more than one. This is where the pin location...