Dougherty#39

10.8 lbs springs. 18s are illegal, but that makes your case even better.

https://www.amazon.com/AES-Industries-10-Inch-Surform-Cheesegrater/dp/B002DLT2LM/ref=asc_df_B002DLT2LM/?tag=hyprod-20&linkCode=df0&hvadid...

@XXX#40 (Jamie)should be able to get ya rollin.

Reroll at 50% of what you originally rolled. Reroll might be faster. It maybe slower, only way you'll find out is if you try it. To many...

Have a LF tire 1/8 smaller. That's a quick way to add a little cross and if you don't like it put the other tire back on. 1/2 isn't...

Run whatever your normal setup numbers are. Start with 1/4 LF camber 2 1/2- 2 3/4 RF camber 1 1/2 front 1 3/8 rear for clone. It all...

In a drawer some where. I've lost so many of those stickers from moving. Or just plain forgot where I put them.

I race at Millers from time to time, been to rockport as early as last year. If you need anything give me a shout. Just like...

@CarlsonMotorsports is the man to talk to!

Last year you had to dang near stop the kart getting into 3 and almost monster truck the middle turtle to really get through there. I...

It just depends on my work schedule. Did they change 3 and 4 or do you still have to park the kart to get it through it?

Some people run less when needed its all situational. Now much you think ole Disco has in this picture?

Thank you @racing promotor (Ken) when I was there last year I think I was up to 10" off the axle. 2/3 PSI on new 21s wiping 3 times with...

What was the kart doing. Rockport is very low grip. 47.5 nose 58 left 64 cross maybe less. +.5 LF camber - 2.5 RF camber pull both...

One of two things 1) Take a washer of cross out or 2)1 5/8 rear stagger. Neither one of those will hurt you at J and M.