Econosprint2

The threaded , i thought was supposed to prevent wear at the drum driver connection . Also i believe a different bearing is used . A...

You'll have to experiment a little but I'd try 2600 to 2700

Sent you a message.

Thank you. Once upon a time I had one of Jerrys adaptors, in fact I had to call him to learn the secret of removing one. Very clever design.

I wrote an article about the responsibility of a good tech inspector. It’s on my web site www.dynodonkartengines.com

Thats the one Im looking for. Thanks for you guys help..

Dover Power.

There are some guys that saturate the foamie with starter fluid to get a good start. How ya detect that?

Are you talking about the upper display with the clear lens? If so we do have those and the battery cover screws.

Screws to hold battery cover down and the clear plastic screen cover.

What other parts do you have. Looking for Mycron 4 parts.

you can measure from that side just subtract the thickness of the nut shoulder

Bondhus only. Non of that junk stuff. You will thank yourself later. Regard less of what tools you end up with just make sure they are...

Keep in mind that the measurement is from the bottom of the retainer. I use a caliper, too and found out I was measuring from the wrong...

Don didn’t call him “stupid”. Don made a suggestion. As for the correct plug, the factory plug is the one designed for that engine...