2005 XXX Infinity setup help

[MJG65]

Can’t seem to free kart up

 

[racing promotor]

Can’t seem to free kart up

Is it a flat kart or champ ? What class and weight ? Do you know your current set up numbers and cambers ?

 

[MJG65]

It is a flat kart running clone heavy 375 lbs. Setup #’s 58C 56L 47N Rf camber 2 3/4 Lf camber 3/4 castor 14 R 10 L FS 1 1/2 & RS 1 1/2 track is small running 12/66 gear. Vegas punching 35 to 40 and left rear is in the 50 range.

 

[WFOorBUST]

Add some left dude.

 

[racing promotor]

It is a flat kart running clone heavy 375 lbs. Setup #’s 58C 56L 47N Rf camber 2 3/4 Lf camber 3/4 castor 14 R 10 L FS 1 1/2 & RS 1 1/2 track is small running 12/66 gear. Vegas punching 35 to 40 and left rear is in the 50 range.

Increase left to 58, increase cross to 61, decrease LF camber to .5.
What staggers are you using ?

 

[MJG65]

1 1/2 fr & 1 1/2 to 1 3/4in the rear

 

[racing promotor]

1 1/2 fr & 1 1/2 to 1 3/4in the rear

That should be good

 

[MJG65]

Thanks will definitely give a try!

 

[racing promotor]

How far is the LR from the inside edge of the wheel to the frame ? Measurement from top back of seat to top of axle ?

 

[MJG65]

Lf in all the way ,Rf in all the way ,RR maybe 1/8 inch off rail ,& Lr a thumbs width out!

 

[racing promotor]

Change the numbers if it's still a tick tight move RR out another 1/8".

 

[MJG65]

8 1/2 inches axle to top of seat bottom of seat level with bottom of chassis and four inches away from inside motor rail to outside seat strut

 

[MJG65]

Adult 185

 

[MJG65]

The XXX has a adjustable L bracket on the right front should it be forward or back?

 

[racing promotor]

In general for that tight of track I'd try it back, as far as for that model specific Jamie will see this he'll be best to answer that.

 

[MJG65]

Ok thanks

 

[WFOorBUST]

Don’t be afraid to put the left to it.

 

[MJG65]

Cool will definitely try it!

 

[racing promotor]

Back up top for Jamie to see so he can comment to help OP.

 

[XXX#40]

Got him through pm.
Look how high the caster was?