stalnakerracing31
New member
box stock pro EL 375lbs . track is medium to a occasionally a high bite track one groove track (jasper) looking for some set up #s to try out
2006 prowler set up ?
- Thread starter stalnakerracing31
- Start date
racing promotor
Moderator
Not familiar with Jasper but have been around the Prowlers some.
58% left
65% cross
46.5 % nose
2.65 Rt Fr Neg Camber, .5 Lt Fr Pos Camber ( maybe .75 since it's one groove to Help cut under people )
Factory Caster
Seat Centered to front post and rear spline to rotor, top rear of seat 9 1/8" off axle.
Inside of rear wheels RR 1/8 " left Rear 3/4 " off Cassette Hangers. Front wheel spacing Narrow
1 3/8" front stagger Rear Track depended ( I would guess there about 1 " )
It should Push some EARLY don't panic provided your tires are close it will come to you, If the push continues to Late into the day especially if it's more going in, pull some cross.
Good Luck !!
58% left
65% cross
46.5 % nose
2.65 Rt Fr Neg Camber, .5 Lt Fr Pos Camber ( maybe .75 since it's one groove to Help cut under people )
Factory Caster
Seat Centered to front post and rear spline to rotor, top rear of seat 9 1/8" off axle.
Inside of rear wheels RR 1/8 " left Rear 3/4 " off Cassette Hangers. Front wheel spacing Narrow
1 3/8" front stagger Rear Track depended ( I would guess there about 1 " )
It should Push some EARLY don't panic provided your tires are close it will come to you, If the push continues to Late into the day especially if it's more going in, pull some cross.
Good Luck !!
stalnakerracing31
New member
Thank you I will give it a go