2012 Impulse

strong08

New member
I am from Kentucky and I mostly run burris. I am thinking about going to Talladega to the tri-state west series race. What would be a basic setup and gear to start on. I typically run a 8 1/4 inch rim on the Lr. at Dumplin because I am ususally loss out of the turn. Would I need this or just run a 81/2
Thanks for any help.
 
Loose out of the turn could be caused by a couple of things;

Not enough LR preload, LR tire not aggressive enough, excessive rear stagger, or the overall balance of the kart is causing a snap loose condition...

LR rim size is mostly a personal preference and I wouldn't go back and forth between them.

Scottie
 
Back
Top