2020 prodigy cadet

[Tgrove3t]

Went out with new chassis last night and struggled with extremely to tight on entry. 7/11 caster.
+.25 lf -2.75 rf
46.5 nose
59 left
68.9 cross
39” rear track width
1-1/2” front stagger
1” rear stagger

any tips for this frame would be nice as I can’t seem to find much discussion but I see them at tracks everywhere.
Thanks.

 

[chad35]

Had same issue on mine. Went to 9/12 castor and freed the kart up.

 

[Tgrove3t]

Had same issue on mine. Went to 9/12 castor and freed the kart up.

Do you run both on the front notches?

 

[racing promotor]

What size track

 

[chad35]

in the cadet yes lead in both sides

 

[Tgrove3t]

What size track

1/8th (not my regular track has tighter corners and will be there a bit threw the winter since it’s about the only local one running)

 

[Tgrove3t]

Clone lite/medium. 340 to 350 is all we have time to adjust on weight between classes.

 

[racing promotor]

1/8th (not my regular track has tighter corners and will be there a bit threw the winter since it’s about the only local one running)

More rear stagger would of helped, probably tires off enough for the high cross to show up

 

[jsf74]

I would have backed off the cross 2 or 3 percent then maybe a tic more stagger if it needed to turn better.

 

["J'-remy]

to loosen a kart remove cross

 

[blh0728]

Stagger is right. Drop cross 2-3% and increase left to 60-60.5 and it will roll