206 slide change

[B1GB1RD]

Is there a video on changing to an un restricted black slide, or can someone explain. I know you have to have a space on the jr restricted slides, but what about the un restricted one? Thanks in advance

 

[mopdog]

What do you mean "have a space"? As is a spec for the opening? If so, then no there is no spec on the opening...just install it. Takes 3 mins (as long as you don't lose the clip that holds the needle in)

 

[rebsfan4]

This is a video showing how to set the restricted slides. I know you ask about the unrestricted slides, but your question is sort of vague.

http://www.briggsandstratton.com/engines-racing/videos/maintenance-repairs/slide-restrictor-system

 

[B1GB1RD]

ok, being new to the 206, when I say space, I mean the gap at the bottom where they check, I see them using a blank to check it. The jr 2 and 3 have to have so much space under the slide I believe to be legal, what im asking is there a gap under the black slide for the "senior" slash un restricted slide? Sorry I dont have all the terminology down yet

 

[CarlsonMotorsports]

There is no drill blank to check the short black slide for unrestricted as it is completely out of the venturi at WOT.
Swap out the slides and you're good to go.



-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cuts
www.CarlsonMotorsports.com
Celebrating 25 years of service to the karting industry
765-339-4407
bcarlson@CarlsonMotorsports.com

 

[B1GB1RD]

Thank you, thats what I needed, guess I had enough terminology to get my answer .... lol