250MX Billet cases

Just another two lol later Chuck
 

Attachments

  • IMG_20211008_095030.jpg
    IMG_20211008_095030.jpg
    116 KB · Views: 144
  • IMG_20211008_094817.jpg
    IMG_20211008_094817.jpg
    99.9 KB · Views: 143
Does anyone other than PK & Buller make billet cases for 250mx cylinders? Thanks.
No Billet, But I cast cases for the 250 mx engine.
The YZ and CR are the most popular and other than crankseal bores are interchangeable.
My cases are 400.00
New design and heat treatment will be available soon.
 
even though I did not start this topic, this is exactly the kind of information I joined for. this has been a very helpful thread, thanks everyone.
 
I have 1 of tims bottom ends with a cr250 cylinder. Havent run it yet due major procrastination but for being cast in a garage i have zero complaints about the quality. Saw a little inside when i had cylinder off to drill my pulse port and looks awesome.
 

Attachments

  • Screenshot_20211021-234528.png
    Screenshot_20211021-234528.png
    397.9 KB · Views: 99
  • Screenshot_20211021-234531.png
    Screenshot_20211021-234531.png
    422.2 KB · Views: 98
Probably 181’s or mikuni 34’s. Note the filter cups are individual unlike the Buller duals where they share a common cup. Plus the buller 360/380’s don’t deliver nearly enough air or fuel on a 250. The 420’s made by Buller for the Bama 250 don’t look like these either
 
Probably 181’s or mikuni 34’s. Note the filter cups are individual unlike the Buller duals where they share a common cup. Plus the buller 360/380’s don’t deliver nearly enough air or fuel on a 250. The 420’s made by Buller for the Bama 250 don’t look like these either
Their Mikuni's and yes the 250 can take a lot of carb I have one 34mm on top and a 36mm on bottom
 
News to me...... I specifically sent him a set of CR cases to get measurements for a CR125 that he told me he never got around to making the cases. As far as I know he only made either a Yamaha or KTM 125, and I think he only done one or two of those. I tried for years to get a sets of CR cases.
 
Back
Top