4 cycle motor mount

yroc

New member
Looking for recommendations for a 4 cycle motor mount. Needs to be international and I have 1 inch tubing.
 
I believe PMI sells it also with a International base plate included and it would be cheaper than buying each separately.
 
You’re right. The top plate on these slide side to side. You choose which of the three holes to put the bolt in the top plate. The base has a slot to allow the top plate to slide side to side for alignment or weight. I looked at the one from TRJ, that is different. I can see where that would be good for tightening or loosening chain adjustments. That is pretty cool.
 
  • Like
Reactions: SCA
Back
Top