Adjusting A Bully Clutch

Todd12

New member
Hello y’all, I have a 2 disc bully clutch i was giving. How can I adjust the RPM’s on it to engage sooner. It engages now at 37/3800. I would like it to engage at 31/3200
 
Back the nuts out 1/2 turn to start then 1/4 turn at a time if needed.
Also you can add weight to the levers if there is none or 1 on it now.
 
You will have to add a considerable amount of weight, or change the springs to softer ones to get the rpm engagement dropped that much.
If it's engaging at 3800 now, you likely have red springs. You can make them work with weights in both holes in the levers, but it will take some time to get it right, and you will be at the limit of the usable adjustment range.
I'd suggest you start with black springs and see how that helps you.



-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
30 years of service to the karting industry
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com
 
Back
Top