Advice needed

[sho900]

How can i reduce my left side weight percentage? looking to degrease it by 4% ---- i am 15 lbs over the minimum weight for my class.

 

[racing promotor]

Move the seat to the right, but I'd question why you think you need 4 %

 

[sho900]

Move the seat to the right, but I'd question why you think you need 4 %

i don't have anymore room to move seat. It will hit the motor on the chain guard...... my left side is 61.22%

 

[racing promotor]

What chassis and class are you running

 

[sho900]

recon 375

 

[racing promotor]

recon

Which weight class ?
Where are you racing at ?

 

[sho900]

375 T

 

[racing promotor]

Do you have the motor slide to the right

 

[sho900]

Do you have the motor slide to the right

yes

 

[racing promotor]

recon 375

So your going across the scales around 390, that should put you around 225 lb with x large seat you should have a little room, but you don't need 4 % only 2 % less max.

 

[sho900]

So your going across the scales around 390, that should put you around 225 lb with x large seat you should have a little room, but you don't need 4 % only 2 % less max.

yes sir 392 to be exact. i might have a 1/8 to move it

 

[sho900]

my chain guard is whats in the way

 

[racing promotor]

Is the plate on top of motor mounted slotted so you can slide it. ?

 

[sho900]

Is the plate on top of motor mounted slotted so you can slide it. ?

Is the plate on top of motor mounted slotted so you can slide it. ?

no

 

[saintedge]

my chain guard is whats in the way

A different chain guard maybe

 

[racing promotor]

no

Check into an adjustable motor mount

 

[sho900]

A different chain guard maybe

thats a good idea.... i'll look online and see if i can find a more narrow one.

Check into an adjustable motor mount

i have the mega mount flip..... but yes i will look into an adjustable motor mount....

 

[sho900]

adding weight to the right side doesn't make sense does it? or moving wheels in or out?

 

[sho900]

if i move the seat over and it is touching the gear guard will that crack the seat?

 

[payneracing714]

thats a good idea.... i'll look online and see if i can find a more narrow one.




i have the mega mount flip..... but yes i will look into an adjustable motor mount....

i thought that.was adjustable, the bolts should be under it 9/16 bolt maybe? i could be wrong though