Animal/LO206 convert to Pro Gas?

OK. Two more questions:

1. Is any port work allowed on the head, or machining the block or head to raise compression?

2. Are disc clutches allowed?

I guess that's three questions.....

Thank you!
 
1. No porting allowed and yes head deck surface can be milled to standard .319 / .011 spec

2. Yes disc clutches are legal.

You can refer to the WKA spec # 705 or see AKRA tech manual for the complete specs.

Steve
 
And now to ask the controversial question: What is the horsepower difference between LO206 and Pro Gas?

I just need a rough estimate. fuel/air flow, spark curve, ambient temperature, lbs/ft torque, and horsepower graphs aren't necessary.....

Thanks for answering my questions!
 
One more question: I see the WKA tech manual says that the Dyno Cams Bordeaux cam is the only legal one. Is that one specific cam, or a series of cams? I couldn't find a cam by that name on the Dyno Cams website, but I could have missed it.
 
You must log in or register to reply here.
Back
Top