Any one ever built there own Tire Roller

[NoftzMotorSports]

Looking for some info on making my own Tire roller. Any one out there ever built one? What type of motor did ya use.

Thanks

 

[BMR Motorsports]

Rotisserie motor is common. Or you could go
The multiple reduction route

 

[Oldschool00]

I built mine with a rotisserie motor
A 2"×8"
Four r12 bearings . Counter sunk and glued them into ends.
Two pieces of 3/4" stock, turned one end to fit in motor. 3/8" dia. Then square cut.
Cost me 26 dollars for motor, the rest I had laying around, I would think all new $50.00 would be max.
Mine takes roughly 7 min per rr tire revolution. http://m.lowes.com/product?langId=-...Id=3318308&store=1151&view=detail&nValue10356

 

[nogoats]

I built my own very similar to Oldschool00, went through a couple motors, then I bought one from Griffin Kinsey at Rebel Fabricators 706-618-9801. I can't remember exactly, but it was around $120. Save yourself some grief and buy that one.

 

[Randy Major]

I built a few...

 

[nogoats]

Are you still selling those Randy?

 

[jack burroughs]

I, too bought 1 from Rebel, great price, works great.

 

[Rickwilson6]

ive heard people using rotisserie motors

 

[BMR Motorsports]

ive heard people using rotisserie motors

Call Rick from Wilson Race Fab... He'll tell you all about it... The guys crazy though so drink plenty of coffee before you make that phone call.

 

[BMR Motorsports]

His username here is: crewchief55w

 

[Randy Major]

NOGOATS....Yes, we are still selling boxes and rollers.

 

[Champkart62]

Here is a roller I just made. If you need any info, just buzz.

 

[Champkart62]

http://s284.photobucket.com/user/champkart62/media/20150806_174305_zpsfxzznkam.jpg.html

 

[KKania17]

kobalt tool box with two rollers and rotisserie motor, built to last works like a champ

 

[Jesusfreak]

1" square tubing 45 x 12, one bbq motor, 2 pieces 1 "aluminum pipe and 4 pieces 1" round stock drill four holes and tap, four heims end your set to go

 

[SKHMotorsports71]

http://s284.photobucket.com/user/champkart62/media/20150806_174305_zpsfxzznkam.jpg.html

How did you attach the rottisery to the tubes?