This came on a raptor flathead I bout about 8 years ago. I remember buying parts to refresh it but can remember the brand or how to put it back together.
Can anyone point me in the right direction?
Uscrew the pressure plate replace with new one and springs .
Turn the drum over sand that plate . Then put in a fiber , a steel floater another fiber add pressure plate install the short Allen head screws . .
If you can measure the spring height before removing .
Check air gap hope for .035 .045 may need to shim with bully shims if too tight .
I was thinking hortsman .greased Lightning . (Buzz- wrong) norm cheetah .