Arc head

It would think not , though my experience is with the Horstman Fire Slot head .
Where the plug is moved and also at an angle.
It is the finned head ? The un finned head probably would .
 
It is finned, But all I changed was the head and temps went up a lot. Maybe need to send micron back to get it checked. It did not feel or run like it was 528 degrees.
 
The CC of the chamber is considerably smaller (= more compression) so it SHOULD run hotter.
Rejet and time the thing for the increased compression and problem solved.
Hours spent on the dyno tuning helps too. ;)


-----
?Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
30 years of service to the karting industry
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com
 
Back
Top