Banshee Front Bearings

IronHorse

Member
I have a 99 Banshee I am preparing for the season. Is there a way to remove the hub and king pin bearings without destroying them? There doesn't appear to be any room to get a punch on the outer race or a bearing puller between the stiffining tube and the bearing.
 
Knock em out and replace them .
the sleeve should be able too be moved aside enough .
on the hubs some heat them up to aide removal hotplate or heat gun .
the bearings are too cheap to try and save .
 
There should be enough room to knock them out of the spindle and hub. Flattop is right they're cheap enough to replace rather than save.
 
Back
Top