Big Bearing or Small Bearing

MAS

MAS

Member
Ok please excuse my ignorance. I have a 2013 Slack Axiom and I’m trying to rebuild the who rear end. I want to order new bearings but when I look to order I see options for small bearing inserts and big bearing inserts. Which should I be getting?
 
Depends on which bearing your going too use .
206 is small 207 is large .
The inserts take up the difference in size .
 
flattop1 said:
Depends on which bearing your going too use .
206 is small 207 is large .
The inserts take up the difference in size .
Click to expand...
Ok. Is one better to use then the other? Also considering a different axle for it. I have a steel zinc coated 32 inch in there now. For super heavy would I be better off going to a chromolly?
 
No real advantage that you could pin point .
Axle is like oil everyone has an opinion .
New standard is adequate . Testing would be the only real way too know .
 
The one type of bearing was in a shortage of availability therefore the other bearing came into play. No difference there. As for axle, if doing local shows, go with the cheaper axle.
 
You must log in or register to reply here.
Back
Top