bolt size for throttle linkage plate.

I'd recommend using ones that are longer than stock if you are using a throttle linkage.
If they are already stripped and your next race is in 5 minutes longer ones can save the day.
 
Im thinking 6mm x 1.0 . Same as the flywheel shroud or valve cover .
Remove one of them and check it .
6mm diameter . 1.0 thread pitch . Length too suit your needs .
Reference bolt for sizing purposes only .
Minimum length 1/2 inch maximum 1 inch or the metric equivelent .
👍
 
I'd recommend using 25 mm bolts for any of the accessories that bolt through the top of the black plate and into the block.
I also prefer using hex head bolts (10 mm Socket) so i can use my impact to take things apart and re assemble ASAP
Carefully thread them into the block and if they bottom out use a washer to shim them so they don't.
That will give you maximum thread engagement.
 
Back
Top