Bully stinger question

[MiCkEyDeAn]

Ok I run a stinger love it ... It works any way lol thats good enough for me ... But here is my question ... My stinger kicks in at like 2500 rpm but max hp not till 4000 rpm ... Is this hurting me on the start ... I run AKRA medium clone class ... The springs i have in it are the yellow ones ... Im guessing they are broke in well prob need replaced ... Whats your opinions on when a clutch should kick in thanx

 

[alvin l nunley]

You want the clutch to slip at peak torque. Horsepower is a calculation. Torque × RPM divided by 5252.1 equals horsepower. If the clutch is holding the engine at peak torque, that torque is transferred to the rear axle, so, peak torque at the rear axle means peak horsepower at the rear axle. This holds true until the axle is turning the same rpm as the engine divided by the gear ratio.

AsFrom the desk of Al Nunley
Comments compliments criticisms and questions always welcome.
If the data does not support the theory, get a new theory. (Al Nunley)

 

[flattop1]

yes 2500 is a bit low. Like you say the stinger works, no question about it.
I'm thinking the blue springs are what you want, another 500 rpmor so would be better