Bully

Engagement should be at peak torque for your engine.
Consult your engine builder for this information.

We build/rebuild clutches for hundreds of racers. From the customers and their engine builders' information, anywhere between 3600 - 4200 for a big pipe AKRA clone.

If you have it set up where you suggest, you'll be in the ballpark. 1 bolt/nut in the outside of each weight lever, red springs @ .235" will get you around 3800 rpm.


-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
27 years of service to the karting industry
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com
 
Yes you can with red springs set at .210 will get you at 3600 rpm if you want any higher engagement take the inside bolt out of the levers and start around .235 to .240 on the spring setting
 
You must log in or register to reply here.
Back
Top