i'm not a premire engine builder or one that builds for others, but i'm not an arm chair builder either. Our engines produce good power....enough to win... I mentioned that the hemi head is unlike the old style, that you can use the 196 clone cams in the 60363. You do have to be careful as with any build, but with the new predator block accepting the clone cams, then the possibilities are endless. And screaminclones....my next engine is going to have the f275 cam....i want them rpm's!!!
Which would be better for a small track the black mamba or 275? I'm geared at a 12 70 turning 6000 but I'd like to be closer to 7-7,500
If its a small/tight track, you 'might' be better off w/the Isky becuz it's got a lower torque/power band. However, if you are allowed too run a disc clutch where you can get the 'stall' high enough, then...the f275 'could' have a smile on ur face! It 'starts' haul'n @ abt 4800 on Alky!!
.. if.your running a small tight track id go with a mod 2 or bp2 cam jmo.. I had the f275 cam and ran on a very small track and was lazy no mattrer how you geared it, swapped to a bp2 & it came to life.. this motor currently makes 24hp hemi head with bp2 cam with a tilly..
Where are the 60363's for sale at? I checked harbor freight site and did not see them. thanks.
.. if.your running a small tight track id go with a mod 2 or bp2 cam jmo.. I had the f275 cam and ran on a very small track and was lazy no mattrer how you geared it, swapped to a bp2 & it came to life.. this motor currently makes 24hp hemi head with bp2 cam with a tilly..