Changing camber and caster

Remember foward set of lines foward line = positive caster

Rear set of lines rear line = negative caster

DO NOT USE THESE INTERCHANGEABLE YOUR CASTER SETTINGS WILL BE OFF

Tighten camber nut = negative

Loosen camber nut = positive

Starting with the gaunlet they started using caster block assemblies to change caster and camber and not pills like chassis prior to da gaunlet

Use caster camber gauge to check caster and camber
 
Just remember center line on caster block is generally std setting.
Moving top forward is less negative or more positive.
Movong top rearward is more negative, or less positive.

If in doubt, hold angle finder against caster block before and after making changes.

If there are 2 lines on chassis, those correspond with forward or back holes on chassis for caster block.
 
Last edited:
Back
Top