Charger cross

[Seth Richardson]

Put a New LF spindle And a high cross RF spindle On from charger. Have all washers maxed out for maximum cross. Can’t get it over 69.5% and it was the same with the standard spindle. Maybe chassis is bent?

 

[flattop1]

You put two new spindle's on .
And cross didn't change at all ?

 

[meracer9]

What year Charger chassis?

 

[Seth Richardson]

You put two new spindle's on .
And cross didn't change at all ?

Yes

 

["J'-remy]

What’s the size of each of your tires? What’s your camber?

 

[Seth Richardson]

What year Charger chassis?

2020 cadet

What’s the size of each of your tires? What’s your camber?

RF 33 3/4 LF 32 1/2 RR 33 3/4 LR 32 3/4

 

["J'-remy]

Get your RF to 34 and you’ll have more cross mine works well with 66-67 why do you want higher than 69

 

[Seth Richardson]

Get your RF to 34 and you’ll have more cross mine works well with 66-67 why do you want higher than 69

More cross=more speed

 

["J'-remy]

More cross=more speed

if you say so. you can just take all your lead and use it to load up your LR and RF. your cross will be off the charts should be the fastest kart out there

 

[jclewis]

2020 cadet

RF 33 3/4 LF 32 1/2 RR 33 3/4 LR 32 3/4

Also, get the LR to 33”….3/4” off stagger in rear will increase cross

How far is LR off the chassis?

 

[meracer9]

Make sure they didn’t send you a JR left front. Had that happen to me by mistake. We never ran more than 67% cross on our cadets. Not sure I agree with your more cross=more speed theory. To each their own.