Cl-4

[jimmysapp]

Anybody had a chance to test the Dyno CL-4 cam? Results? Thanks.

 

[sneaks12303]

Anybody had a chance to test the Dyno CL-4 cam? Results? Thanks.

Not yet , But with the right port job under akra rules I'm ready to try one .

 

[DynoDon]

Sneaks, it isn't legal for AKRA. It is an nka profile.

 

[mocrawlin]

Have a couple. Will be testing in the next week or 2 in NKA engines.

 

[sre57]

We have dynoed 2 engines good power band up to 7000 rpms track testing this weekend

 

[Brown Racing 15]

The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over our current CL3. This cam comes buffed, further smoothing the nose, to take max advantage of the 10.8 springs.

The CL4 is not legal for AKRA.

Straight from there website.

http://www.dynocams.com/item/cl4/cl-stock/

CL4 Cam Max Lift .224 IN .231 EX Not legal for AKRA

BSP4 Cam Max Lift .238 IN .242 EX Legal for AKRA

 

[zastro]

Dynoed one Fri., is smooth through the power band. Felt like it was a little weaker in the mid range than the cl3. Haven't run it on the track yet. Should have a little more input over the weekend.

 

[jdg]

Anyone have any more info?

 

[sre57]

Will know more tomorrow at the track

 

[jdg]

Anything

 

[sre57]

Yes strong turned it 6950 in practice main drooped some gear 6750 look good across the board got took out on lap 11 going to run 3 different set ups in 2 weeks