Mrdavid78 Member Jan 14, 2022 #1 Without a spring tool, what do yall recommend to use when putting clutch springs on to set the spring height's ??
Without a spring tool, what do yall recommend to use when putting clutch springs on to set the spring height's ??
mike97760 Site Supporter Jan 14, 2022 #5 Keep in mind that the measurement is from the bottom of the retainer. I use a caliper, too and found out I was measuring from the wrong side. Oops!
Keep in mind that the measurement is from the bottom of the retainer. I use a caliper, too and found out I was measuring from the wrong side. Oops!
OVALTECH1 Site Supporter Jan 15, 2022 #6 you can measure from that side just subtract the thickness of the nut shoulder
Mrdavid78 Member Jan 15, 2022 #7 Just so im clear im measuring from the point marked A in the pic ? Attachments Screenshot_20220115-183524~2.png 239.2 KB · Views: 12
flattop1 Dawg 89 Jan 15, 2022 #8 Yes .the under side . The object is make them all as even as possible .