columbus indoor cross amount

P

planda31

Member
Im running an ultramax element and the set up instructions say to run 60% plus on cross. Harold Wiggins says to cut down on cross on indoor racing on Phantoms. I am confused on how I should set up for Columbus. Any help would be appreciated.
 
Nose-47.0
Left-56.0
Left front spindle all the way up
Right front spindle all the way down
Right front camber-3 1/2
Left front camber- 0.0
Right front castor- 11.0 pos.
Left front castor-7.0 pos.
Front stagger 1 1/2
Rear stagger 1 1/4

Tires maxxis pinks rights
3/4 ounce lambert blue
3/4 ounce mafia original
Mixed together in a glass container which combined =1 1/2 ounces
Take valve stem out squeeze or push down on tire place a small tube on a small funnel
Then with valve stem to the bottom place funnel on valve stem and pour mix into funnel while relaxing tire
Put valve stem in being careful not to move tire not to splash onto side walls put 10 psi air
Carefully carry to roller and let roll 24 hours do not put anything on the outside

Left rear- straight up nothing on inside

Left front - 1/2 ounce lambert blue and 1/2 mafia original
Roll all tires together at the same time.
Before the bashing starts:
I have been out of karting for a few years. Why?
I am in late model stock cars now, but I have a trophy case full of trophies from karting
And I have been on a lot of different chassis and I can say this though experience.
And have outrun big names in karting on old chassis.
I have come to learn they are all a piece of metal and they all will take the same numbers
Now kart manufactors will not like this post as well as tire guru's that want your money
The only reason I am giving out this secret is I am no longer in this sport after a lot hanging around all the right people. Here is my email just in case someone wants to see if I know what I am talking about.
Wayneshell4@gmail.com
 
I have never raced there but don't follow a lot of that advice...for one you wont be able to race with maxxis tires
 
Shell Motorsports said:
Nose-47.0
Left-56.0
Left front spindle all the way up
Right front spindle all the way down
Right front camber-3 1/2
Left front camber- 0.0
Right front castor- 11.0 pos.
Left front castor-7.0 pos.
Front stagger 1 1/2
Rear stagger 1 1/4
Click to expand...
I've seen posts removed for much less reason than this. Cluttering the board with repeated posts of the same information, that appears to me to be in need of some editing.

It appears that some 10-year-old is having a dull Saturday morning.

From the desk of Al Nunley
Comments compliments criticisms and questions always welcome.
If the data does not support the theory, get a new theory. (Al Nunley)
 
alvin l nunley said:
I've seen posts removed for much less reason than this. Cluttering the board with repeated posts of the same information, that appears to me to be in need of some editing.

It appears that some 10-year-old is having a dull Saturday morning.

From the desk of Al Nunley
Comments compliments criticisms and questions always welcome.
If the data does not support the theory, get a new theory. (Al Nunley)
Click to expand...

Needs editing based on what?
And let's not forget, you do not talk down to people, remember? :)
 
You must log in or register to reply here.
Back
Top