Infantilebehavior
Member
Damn covid! Shipping is on buyer, PayPal F&f. Only allowed 3 pics so let me know what u need showed more of..
SOLD Unbuilt big bore stroker GX200 longblock
- genuine Honda block, 2.915 bore, extended .080, welded pin
-Wiseco 2.915 piston, rings, heavy pin
-Cometic head gaskets
- ARC 2.3" stroker crank
- ARC 3.625 stroker rod
- Dyno cam, adjustable billet, exact specs I'm forgetting, but something like .300,245d,
Ex/.285,260d, In. Cut for power and ratio rockers!
- ARC dual bearing sidecover
- Clements top plate
- ARC PVL lite flywheel(no coil)
- Gage Warhead, blank, comes with seats, guides, 32/28 valves,
- Gage rollers, black venom 1.35 ratio
- Raceseng cut to length pushrods, nitrated tips
- full stud, gasket, bearing set
nothing else included in gx package.
SOLD - Raceseng valve cover, I countersunk inside bolts. New with original box, gasket
SOLD - Raceseng valve cover spacer, 1/2" black
$225- EC 304 dominator, alky, extra red goodies included
$275- 3D manual clutch, full kit,
$ Odds and ends...
Valves, 28/32 5.5mm stainless,
28/32 5mm stainless,
30x5m, 33x5.5, 29x5.5 Titanium(need cut to lenggth) ALL SOLD
$300- blockzilla 2, 3.012, could use a new sleeve(I have one) if u plan to race it, or run it on a yard kart/mini bike, comes with blossom head,
Have spare blockzilla sidecover and a new piston also, will sell if block goes, package deal?
$50- ARC 3hp drag flywheel, Briggs
$50- 3.5" piston, used for mockup, no rings
$50- mini drag bike piston 2.992
$50- domed Briggs piston 2.992
$60- Briggs standard Wiseco + long rod
$40- Briggs 3.875 rod new
$75- 26mm mikuni round(genuine)
$75- 24mm mikuni flat(genuine, alky)
$150- ARC breather for blockzilla, single out
$100-ARC adjustable timing setup
$200- horstman X5 clutch, basically new, + extras
$400- twin burco mikunis bm34, kawi manifold
$200- military spec hr196 with billet stack
$300- twin Posa fuel injector carbs 26mm
Also have some random Tilly's kicking around
SOLD Unbuilt big bore stroker GX200 longblock
- genuine Honda block, 2.915 bore, extended .080, welded pin
-Wiseco 2.915 piston, rings, heavy pin
-Cometic head gaskets
- ARC 2.3" stroker crank
- ARC 3.625 stroker rod
- Dyno cam, adjustable billet, exact specs I'm forgetting, but something like .300,245d,
Ex/.285,260d, In. Cut for power and ratio rockers!
- ARC dual bearing sidecover
- Clements top plate
- ARC PVL lite flywheel(no coil)
- Gage Warhead, blank, comes with seats, guides, 32/28 valves,
- Gage rollers, black venom 1.35 ratio
- Raceseng cut to length pushrods, nitrated tips
- full stud, gasket, bearing set
nothing else included in gx package.
SOLD - Raceseng valve cover, I countersunk inside bolts. New with original box, gasket
SOLD - Raceseng valve cover spacer, 1/2" black
$225- EC 304 dominator, alky, extra red goodies included
$275- 3D manual clutch, full kit,
$ Odds and ends...
Valves, 28/32 5.5mm stainless,
28/32 5mm stainless,
30x5m, 33x5.5, 29x5.5 Titanium(need cut to lenggth) ALL SOLD
$300- blockzilla 2, 3.012, could use a new sleeve(I have one) if u plan to race it, or run it on a yard kart/mini bike, comes with blossom head,
Have spare blockzilla sidecover and a new piston also, will sell if block goes, package deal?
$50- ARC 3hp drag flywheel, Briggs
$50- 3.5" piston, used for mockup, no rings
$50- mini drag bike piston 2.992
$50- domed Briggs piston 2.992
$60- Briggs standard Wiseco + long rod
$40- Briggs 3.875 rod new
$75- 26mm mikuni round(genuine)
$75- 24mm mikuni flat(genuine, alky)
$150- ARC breather for blockzilla, single out
$100-ARC adjustable timing setup
$200- horstman X5 clutch, basically new, + extras
$400- twin burco mikunis bm34, kawi manifold
$200- military spec hr196 with billet stack
$300- twin Posa fuel injector carbs 26mm
Also have some random Tilly's kicking around
Last edited: