Deuce body on Phenom?

TTCarr

Member
Anyone know if the Deuce body will fit an 08 Phenom? Direct fit or any adjustments that can be made to fit it? Thanks!
 
Width would be the only real possible trouble. Not really much issue there either.
Other then the regular body mounting frustration. Nothing a sawzall can't fix.
If you've never mounted one it could be painful.
I like to mount the side panels to the nose first.
Set chassis on floor with no tires or wheels set body on and center the wheel openings . If you have just wheels check your fit with them on spindles .
Shine a light from outside to mark the holes. . The nose is harder to mark .

It can be done on the stand with some 2/4 's but a little more trickey.
Then put tires on and hopefully you won't have too much to trim.
Having some one with experience would be a big help.
 
As long as its possible im going to give it a try! Have mounted my current body, but have read a lot on how to mount properly whereas before I didnt. I just really like the design and look of the Deuce body, but if it was going to be too difficult, I was going to go to the seraph body. Thanks for your input on this!

Any one else do this yet with any other advice?
 
Back
Top