Enduro Front Brake Hubs - Available

Y

yamadog35

Member
For any enduro folks that might be looking for front brake hubs which are hard to find. Craig Dori in Indy has multiple sets of a design that he had made over the past couple of years. I just got a set and they look very nice. The rotors on the set in the picture are also ones he had made up, but the hub has holes drilled/tapped for standard MCP rotors. You'll need to work out price with Craig. If anyone wants his contact info, shoot me a PM.

Note that the set shown has width dimensions of the MCP hubs. He has some sets that have a thicker boss area (between the arrows) so they are just a bit wider.

CD_FrontBrakeHubs_1_zps500e872e.jpg

FrontHubBossArea_zps146f9f93.jpg
 
That looks good. On the rotor size, is that similar to the dirt oval "mini-lite" rotors or is it smaller/larger?
 
The rotors are the 7.5" enduro version. Looks like the photo below when used with the MCP caliper on front spindle. The caliper is basically the mini-lite (one half) with a fixed pad mount on the tire side. The hub and rotor in the photo are MCP.

IMG_0372_zps9f0e7902.jpg
 
You must log in or register to reply here.
Back
Top