owenracing9
New member
2007 Epic Champ Kart
$950
See pictures here:
http://owenracing9.wixsite.com/owenracing/epic
It is in good condition. I stripped the entire kart down so that I could have Ward Karting inspect the frame. Mike told me he would have no issue recommending this kart because it was in really good shape.
I have cleaned every inch of the kart, including the fasteners.
The following items are brand new (never been on the track):
· rear bearings
· front bearings
· side body panels (with dzus fasteners)
· floor pans (all 3 - front, middle, rear)
· chain
· wheel studs
· brake pads
· brake lines, fluid, and all fittings
· brake caliper o-ring
· adult medium seat, PRC Select
(Note: seat was mounted and a few holes were drilled where we were going to mount weights, but we never mounted them and the seat has not made a lap)
Body is white. Nose has several coats of fresh paint. Side panels are new. They have not been mounted. They still have protective cover on them, which is what you see in the images.
Also included extra parts:
· engine mount
· Mychron 3
. 2 LH spindles (not bent)
· 1 RH spindle (not bent)
· 3 rear hubs
· 3 front hubs
· steering shaft upright support
· L-block
· seat strut
· front seat supports
I think you will be pleased with this kart.
If you have any questions don't hesitate to send me a text or call.
I live in central NC near Greensboro. I'm willing to bring it to a local track, ex: Liberty, Woodleaf, etc... If you are a state or two away I may be willing to meet you half way, but we can discuss that together.
Thank you for taking the time to look at the kart!
BT Owen
336-233-7519
$950
See pictures here:
http://owenracing9.wixsite.com/owenracing/epic
It is in good condition. I stripped the entire kart down so that I could have Ward Karting inspect the frame. Mike told me he would have no issue recommending this kart because it was in really good shape.
I have cleaned every inch of the kart, including the fasteners.
The following items are brand new (never been on the track):
· rear bearings
· front bearings
· side body panels (with dzus fasteners)
· floor pans (all 3 - front, middle, rear)
· chain
· wheel studs
· brake pads
· brake lines, fluid, and all fittings
· brake caliper o-ring
· adult medium seat, PRC Select
(Note: seat was mounted and a few holes were drilled where we were going to mount weights, but we never mounted them and the seat has not made a lap)
Body is white. Nose has several coats of fresh paint. Side panels are new. They have not been mounted. They still have protective cover on them, which is what you see in the images.
Also included extra parts:
· engine mount
· Mychron 3
. 2 LH spindles (not bent)
· 1 RH spindle (not bent)
· 3 rear hubs
· 3 front hubs
· steering shaft upright support
· L-block
· seat strut
· front seat supports
I think you will be pleased with this kart.
If you have any questions don't hesitate to send me a text or call.
I live in central NC near Greensboro. I'm willing to bring it to a local track, ex: Liberty, Woodleaf, etc... If you are a state or two away I may be willing to meet you half way, but we can discuss that together.
Thank you for taking the time to look at the kart!
BT Owen
336-233-7519
