Gearing recommendation for new track

[Maltamirano]

Hey everybody,
Ill be running a new small track next month.
Heres the info:
I will be running pure stock class at Chowchilla barn burner
website has it as a slightly banked, 1/10 mile, decently tacky track
I have a 12 tooth or 14 tooth clutch drive gear and an assortment of rear gears. Any recommendations as far as gearing for this type of track? Open tires, so will T-11 compound be sufficient? thanks for the advice.

 

[racing promotor]

Pure stock with a plate or unrestricted ? at what weight ? Pure stock Predator ? Clone ?

 

[Maltamirano]

Pure stock 212 predator unrestricted. Total weight including myself was about 380.

 

[Maltamirano]

Inferno clutch

 

[racing promotor]

Pure stock 212 predator unrestricted. Total weight including myself was about 380.

The 14 tooth driver

 

[Maltamirano]

Any recommendations on starting point for the rear gear?

 

[racing promotor]

Any recommendations on starting point for the rear gear?

Based on your info of 1/10 mile, 14/59 should be close starting point, target 4850 rpm

 

[Maltamirano]

Thank you for the help. I’ll start there and play around with it.

 

[racing promotor]

Thank you for the help. I’ll start there and play around with it.

Rear will probably be a little low but prove that first because if you start gear bound you'll chase it a lot longer till you figure it out