Gx 340 to mikuni swap.. what size?

[Kaboom 2 soon]

I want to use a mikuni or similar carb on my Honda gx 340.It is minus govenor,has a custom pipe and will be getting HD valve springs.Id like to know what size (mm) carb to use that would get me reasonably close to being able to dial / re jet it to get a decent idle and basically not drown in fuel it cant process into turf ripping foward thrust. Ive been looking for some input for a while now and im about to but a stock clone carb on it just so I can finally use it. BLESSINGS 2 ALL

 

[flattop1]

Me i would find a carb off a 125 cc 2 stroke or a equal size 4 stroke .dirt bike quad or snowmobile. Something thats similar size to the spacer .

 

[CarlsonMotorsports]

24mm will be adequate for what you are doing. 28mm allows a little growing room.

If you want to grow your build a bit more in the future, then you could go with my favorite, the 33 pumper Mikuni - then you can go considerably bigger with cam, port cc, and valve size.


-----
?Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
30 years of service to the karting industry
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com