GX160 with Gear Reduction crank swap

[junor747]

I have a Honda GX160 with gear reduction is Model GX160UT2HX2 Serial GCBPT-1198291. This comes with a splined crank that turns a 6:1 gear reduction unit. I am going to replace the crank so I can run a pressure washer. It needs to be a keyed 3/4 output shaft. There appears to be several flavors of cranks available. Part #s 13310-Z4M-6 or 8 series. Can anyone help me with the Honda part # I need? Thanks in advance

 

[combative hodaka]

Pressure washers / generators etc usually require taper shaft not a strait keyed so you may want to double check the pump you have.

 

[steve baker]

You need a straight shaft crank then the part number is #13310-Z4M-800. But as hodaka says, you might check and make sure its not a taper shaft. Honda actually offers about 6 different shaft configurations for various applications.