Gx200 baby stroker

So I have 1 gx160 2 gx200 blocks laying around nd 1 predator 212 hemi (parts included)
Someone once told me I can have a baby gx200 stroker with 212 hemi crank (54mm<55mm) but I can't remember everything that was mentioned since it's been a while
Does anyone have correct combos to have fully functioning engines!?
I was trying to find something in the honda section but didn't get passed page 2 or 3 lol
 
Not sure you can do that with the parts you have. The gx200 connecting rod won't fit a 212 crank nor will the 212 piston fit into the gx200 block. Rod journal diameter differences in the cranks, piston size differences and wristpin differences keep it from happening without buying more parts.
 
The short of it is you put the crank in .
Then find a piston rod combination that fits and doesn't have the piston sticking out. The cylinder .
 
212 hemi predator crank 55mm w/its matching 3.308 rod, gx200 wrist pin and piston

Hemi's wrist pin journal is .709 and the gx200 wrist pin/piston journal is .708

If I'm not mistaking, using the hemi crank and rod in the gx200 put the piston flush with the deck
 
‼️UPDATE‼️
hemi 55mm crank
hemi 3.308 rod
hemi wrist pin
gx200 std piston

I give you guys a gx200 baby stroker
gx200 - 196cm³ block
68mm x 55mm = 200cc
Piston is probably 1mm away from flush with deck

I'm gonna order a 68mm flat top piston asap,
then figure out what to do about a head and
Snapchat-138690546.jpg
Snapchat-1869560477.jpg
Snapchat-33687018.jpg
 
Back
Top