help I need a .035 over 1985 wiseco piston for 4.475 rod

K

Keller clone killer

New member
Wiseco has discontinued this piston and I cant find one on
ebay if anyone has one please let me know I have a boring
Machine so I would take another oversize ...
 
Just use the .565" compression height piston and re-cut the deck to get your pop-up where you want it. Once you've got the deck re-cut (about .035") then you'll have good availability on pistons for your rod again. Better yet, update to the 4.500" rod (uses the .565" c/h pistons.)

-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cuts
www.CarlsonMotorsports.com
Celebrating 25 years of service to the karting industry
765-339-4407
bcarlson@CarlsonMotorsports.com
 
You can still use the .565" piston. That way you've got availability in the future as well. Are the seats real close to the top of the deck or anything else prohibiting you from cutting the deck to accommodate the shorter compression height pistons?
 
Clyde Little (Little's Kart Shop, Hunterstown,PA.) has a lot of mid 80's inventory. You might get lucky. 717-334-2523
 
You must log in or register to reply here.
Back
Top