Help ID Clutch

Ragnar

Member
Can you guys help me ID what type of clutch this is? Trying to reset it for another class.

Thanks
 

Attachments

  • IMG_3904.JPG
    IMG_3904.JPG
    123.7 KB · Views: 41
  • IMG_3903.JPG
    IMG_3903.JPG
    121.6 KB · Views: 40
Thanks for the link. Sounds like we have a Viper clutch. We need to set stall for 3 different classes we run. The link is a little vague other than the one setting for 3800. We specifically need spring heights for the rpm below:

1) 4000
2) 3500
3) 2800
 
Go to www.clutchbarn.com

Brian has a chart for the original .090" spring as well as the Surge .085" Gold spring.

Putting the gold spring in at recommended height should be fine.

You can also drill out levers for 1/4" weights instead of the #10 that is standard.
 
Your clutch is built from Viper/Gator parts.

Not sure who built it, but it didn't come from Viper direct, and most likely not from Gator direct.

Most likely from a private builder who buys kits from either Viper or Gator.
 
Looks like the same design . The intregal bearing driver sleeve is different though . Most are separate .
 
Back
Top