Help with setup on qrc indoor red dirt

[Jmmarkert]

Can some one help me with
Chassis set up.
I have a a90 qrc we run on red dirt
In texas. ,was running a green plate
Clone akra. Kart was loose center
Off . Added cross but didn't help
Much. Was at 49 %my son was
Running flat. Out.

 

[Phiddy]

How much cross did you add, maybe you need lots more? How much is your left side%? You running flat out maybe take a tooth off the axle? The more info you can give the better the answers or advise will be.

 

[Jmmarkert]

Added 1% across change from 1 inch to 3/4 inch rear stagger running Burris 11 took one tooth off the rear gear and still lose Center off my son is running flat-footed. should he be letting off going in the corner some . left side 52%

 

[racing promotor]

Help me out you say a 90qrc ? Guess I'm trying to confirm is it a standard kart chassis ?

 

[Jmmarkert]

2018 winged kart qrc. Model is a 90. Like a box stock winged kart.

 

[flattop1]

Added 1% across change from 1 inch to 3/4 inch rear stagger running Burris 11 took one tooth off the rear gear and still lose Center off my son is running flat-footed. should he be letting off going in the corner some . left side 52%

It turns in good then gets loose? Spin loose or simply slides a bit .
Are you getting passed in the center of the turn?

 

[Jmmarkert]

Spin loose almost . And yes he is getting passed

 

[racinnut15xm]

If he's flat footing it sounds like a forward drive issue not a loose issue. Tried more rear%? Think we are running about 54% cross

 

[Jmmarkert]

I'll try that thanks