hemi governer

[debogotthis]

anyone know which hole to put the spring in for a 5500 governer

 

[debogotthis]

anyone know??? all i can get is 5333

 

[flattop1]

Stretch or shorten the spring, which ever you need.seems stretch would be correct, not done much governer work but removal.

 

[W5R]

If you look where the governor arm is bolted to the shaft coming out of the engine, you'll notice a bolt there. Loosen the bolt, you can pop off the arm/lever and slide it back on in a slightly different position to get a little more rpm before the governor starts kicking in sometimes, if you can't get the extra rpm by playing with springs

 

[cking]

5300 is about all the RPM you are going to get with a STOCK predator with the governor removed.
The stock motors I have ran will run around 5350 to 5400 RPM tops. If others are running more than 5400 rpm, they got a real good one out of the box or they are not running a stock motor.