Holeshot 2 disc 6 spring

[Lightning3]

This clutch looks more like a Viper than a Bully. I'm looking for a starting point for spring height and weights on this clutch. The springs are silver in color. I'm wanting 3800 RPM engagement. Thanks

 

[Michael Curry]

Probably a Holeshot Alter Ego clutch.

Try .400" if the levers have a nut/bolt installed

 

[Lightning3]

Probably a Holeshot Alter Ego clutch.

Try .400" if the levers have a nut/bolt installed

Just to verify, 1 bolt in top lever and .400" from top (using spring gauge not calipers) of the retainers to face plate?

 

[Michael Curry]

Yes....using a Genuine Bully Brand Spring Height Gauge calibrated with the Included Standard

.400"

 

[Michael Curry]

This is lever, correct ??

 

[Lightning3]

No, looks like a Bully lever

 

[CarlsonMotorsports]

^ Ball lever at that.
Mike can help you out, he knows these clutches better than anyone.


-----
Thanks and God bless,
Brian Carlson
Carlson Racing Engines
Vector Cutz
www.CarlsonMotorsports.com
Carlson Motorsports on Facebook
www.youtube.com
34 years of service to the karting industry ~ 1Cor 9:24
Linden, IN
765-339-4407
bcarlson@CarlsonMotorsports.com

 

[Michael Curry]

It would have to be a WAG..... I don't use the Bully Ball Lever for any builds.

The ball will eventually create a "divot" in the pressure plate and give inconsistent performance.

I would start at .430" and do a holeshot on the ground and adjust from there.

Try contacting Ace at Holeshot or JP at 31 Engagements.....they have way more experience using that lever on a "Baker" designed clutch.