M Marleyboy New member Nov 17, 2013 #1 How do you check your front spindles with an angle finder to see if they are still good and not bent
flattop1 Dawg 89 Nov 17, 2013 #2 visual is about it. the axle part a straight edge. If you think they are that's a good indication.
H harrym Member Nov 17, 2013 #3 I machined a piece of tubing that is a snug fit over the spindle. If the tube goes on hard or not at all...it's bent.
I machined a piece of tubing that is a snug fit over the spindle. If the tube goes on hard or not at all...it's bent.
J johnelliott Member Nov 18, 2013 #4 If the hub doesn't slide on easily or it takes a lot of adjustment to get camber set, you might have a problem.
If the hub doesn't slide on easily or it takes a lot of adjustment to get camber set, you might have a problem.