I can’t figure out what my chassis is.

Luke beck

New member
I have looked at every chassis I can find online but I can’t figure out what mine is. I will try to get some better pictures later but it has some long king pins that I’ve never seen on any other chassis before. 2F20417C-2244-4CBC-94EA-46D342D44236.jpegB730D76A-B294-4123-8980-FE81263B5A9B.jpeg
 
They are probably screw jackers...if it's got a stop nut above the spindle, I'd wager that the spindle barrel is threaded and you can raise or lower your cross without the hassle of shim washers.
 
They are probably screw jackers...if it's got a stop nut above the spindle, I'd wager that the spindle barrel is threaded and you can raise or lower your cross without the hassle of shim washers.
Yes that is how it works. Do you know what kind of chassis would have those?
 
It also could have been a champ kart that somebody cut the cage off of because it has seatbelt attachment points on the side and has paint over were it would attach to the frame
 
Looks like my son's 2001 Buller speed demon this might me a older Buller cause it doesn't have the fully adjustable front spindles like the speed demon
 
Here is the seatbelt mounts and spindles along with the painted over letters were I think a cage might have gone.
 

Attachments

  • 9E1FA8A4-3ED6-46FC-ACDA-81C127807054.jpeg
    9E1FA8A4-3ED6-46FC-ACDA-81C127807054.jpeg
    88.8 KB · Views: 81
  • 1609B184-9A7D-4652-9C45-286D70028B23.jpeg
    1609B184-9A7D-4652-9C45-286D70028B23.jpeg
    71.9 KB · Views: 85
  • F3F1E90D-410F-408A-9BC5-35C83E8DFAE8.jpeg
    F3F1E90D-410F-408A-9BC5-35C83E8DFAE8.jpeg
    71.8 KB · Views: 85
I always assumed LT meant Left Turn and indicated an offset chassis... But it could mean Large Tube, 1.25" vs. 1.125"
 
Back
Top