Icon push

[racing promotor]

What do you mean by “tended to like to knock down the fence” ??

What he Meant was it won't turn.

 

[flattop1]

Ohh no , ohh no , I'm headed for the hay bales !

 

[racing promotor]

Ohh no , ohh no , I'm headed for the hay bales !

YES, and hopefully there are hay bales and there not soaking wet Feel like concrete !!

 

[KartingIMG]

What he Meant was it won't turn.

Also what did you mean by “taking out the rack in the back”??

 

[flattop1]

" Rake " it's the difference in height of the left and right cassette .
Allowing the chassis to tilt down in the left rear corner .

 

[KartingIMG]

Ohh no , ohh no , I'm headed for the hay bales !

the Icon I like 1/8 slugs hole down bottom hole LR; zero slugs bottom hole RR. When I took rake out of the back of the kart it tended to like to knock down the fence .
More bite in the tires .
Wiggy bar ?

So are you saying that when you did this you didn’t like it? Just learning how the slugs work. Currently have zero in the left and right. I have an 08 icon

 

[flattop1]

Correct . 1/8th hole down is typical .

 

[KartingIMG]

Correct . 1/8th numbers down is typical .

So would you recommend leaving them zero on both sides or putting in the 1/8 slug in on the left side?

 

[flattop1]

Factory recommend the 1/8 , every one ran them that way .
I would recommend the same .

 

[hotelcalifornia]

Yeah dude when I had my left rear pill up in the bottom hole I had to move the RF way up to get my cross to what it should be. By that point the ride heights of the chassis were so thrown off..until I figured out the pill was put in wrong, I was flying off the track at a few different races. Cost me a lot of money and anger. When I flipped the pills back to being hole down it ran so much better