Indoor Recon setup

[JanGaLanG]

Small tight bullring completely flat indoor at Sturgis KY. 2016 Recon. 6'1 driver 215 lbs running clone. looking for numbers.

 

[hotelcalifornia]

Small tight bullring completely flat indoor at Sturgis KY. 2016 Recon. 6'1 driver 215 lbs running clone. looking for numbers.

45.5 nose
4 washers on bottom of RF spindle
-2 RF Camber
.5 LF Camber then set the LF washers to where you've got about 62 cross
58 left
Both caster blocks in back holes
9 and 12 caster

1.5" front stagger
1.5" rear
Make the left front as much bite as you can, and use that one regardless of how your other tires are. I like running even air pressures left to right. Although I'm unsure what the proper psi would be for you, maybe 5 to start. Make sure to get your bite from inside prep more than outside

That should turn well. If it still won't turn, pull up the left rear rake on the block by 1/16" to 1/8"

 

[JanGaLanG]

Thanks for the response buddy I really appreciate it.