ISO stroker crank

["J'-remy]

Looking for a Stroker crank for Flathead open project

 

[Flatlives]

What size journal and stroke?

 

["J'-remy]

Thinking of +.200 and keeping a 1” rod but this is in the early stages.

 

[Skidude]

I got mine +.200 from ARC. It’s not a bad build, just make sure to use a welded billet cam, not tool steel, as you will need to clearance the rod to the cam.

 

[Petree]

How about that motor I have pictured? .150 stroke Lunati crank. 1 inch pin. Bored .140 . Wiesco piston. 4.375 Horstman H beam rod with about 20 hours of die grinder by hand labor for clearance. 126 Dyno cam. 1.125 and 1.250 stainless valves. Blue Jr. Race Billet sidecover. Clements steel billet 3 hp wheel. EC stage 1 HL380 all ready to go.

 

[Hitch#05]

Looking for a Stroker crank for Flathead open project

I got an ARC billet crank 563 stroke, 250 shipped

 

["J'-remy]

ill ask my buddy