So I recently got an invader kart with a kt100 and an LT wet clutch. Kart wasn’t set up properly so I only rode it twice for probably a total of a minute and a half before I decided to change a few things. First off, exhaust pipe was pretty loose so that led me to get a 4 hole can. Next I put 13”turf tires on it to help clear the driveway and speed bumps (I mainly ride in my neighborhood). Kart is setup with 9/71 sprockets. Today I finally fired it up and it’s very sluggish. Wants to go and it will gradually pick up speed but it’s nothing like before and it Boggs down. Tires too tall, 4 hole can causing the issue??
KT100 problem.
- Thread starter Jake5150
- Start date
Pete_Muller
Moderator
- Gearing quite tall with 13" tires
- Clutch slipping at too low an rpm
- Can definitely reduces power
- Clutch slipping at too low an rpm
- Can definitely reduces power