Looking for help with c block front end

Then you pretty much got what you got .
Cut weld , bend or modify .

You don't need cut, bend, or modify anything.

The Rage C-Block front end was a unique design.

When we had these chassis, we would use a digital level on top of the C Block to measure castor, and rotate as necessary. Each turn of the pill on the serrated block was approximately 0.25 Degrees of camber per turn.
 
You don't need cut, bend, or modify anything.

The Rage C-Block front end was a unique design.

When we had these chassis, we would use a digital level on top of the C Block to measure castor, and rotate as necessary. Each turn of the pill on the serrated block was approximately 0.25 Degrees of camber per turn.
If he. Has that , then he's in Luck ;)
 
Thanks for the info hope to be in scales Thursday going to try the level for the caster have a camber gauge
 
Anyone know if you can get the nut anywhere that goes on the of the C-clamp? (King Pin goes through)

Have mine I just like having spares and a back-up.
 
Back
Top