Looking for old style invader caster/camber pills

Gravey39

Member
I’m looking for older style pills like these I’ll post more pictures of the measurements
 

Attachments

  • 969E8DE5-5DBE-4042-87E2-518A60FE23E2.jpeg
    969E8DE5-5DBE-4042-87E2-518A60FE23E2.jpeg
    48.4 KB · Views: 33
  • E7CD7449-BF74-4497-8D9A-83B209C7E6F2.jpeg
    E7CD7449-BF74-4497-8D9A-83B209C7E6F2.jpeg
    121 KB · Views: 35
Here’s more
 

Attachments

  • 188DBAAA-9432-4F5E-A740-E6C5647A23D1.jpeg
    188DBAAA-9432-4F5E-A740-E6C5647A23D1.jpeg
    76.3 KB · Views: 21
  • 8A08330D-16BA-4FAF-A817-E8B62CB4A98F.jpeg
    8A08330D-16BA-4FAF-A817-E8B62CB4A98F.jpeg
    71.3 KB · Views: 21
I've made many pills for different karts. Do you have one you can send out? How many do you want?
No, i don’t happen to have one I can send out, i bent one of my other spindles, so I have to put these on for this weekends race. I can give you all the measurements, if you can do it that way. I just need two that will drop 2 degrees. So I can go from 10 degrees to 8.
 
So the king pin is 3/8" or 10mm, the spindle hole is 5/8"? other measurements are generic. It being thurs you'll be hard pressed to get 'um by this week end from NJ but may be possible. I can also straighten spindles if they're not too far gone.
 
The kingpin is 3/8’s. The hole that the pill sits into is 5/8’s. I’m not worried about getting the pills by this weekend. I’m going to run these with the neutral pills that I have until I can find some other ones. So if you can make some, that’d be awesome. Just give me an idea on pricing. Thank you man!
 
I've made many pills for different karts. Do you have one you can send out? How many do you want?
You still able to make pills? I have a Trackmagic that used the same Invader spindle hardware. I have a pill to send you that needs replication. Thanks in advance
 
Back
Top