Loose on entry.

[New Racer]

I got an 07 Phantom Icon loose on entry. Clone 375 nose 46.5 leftside 58.5 cross 62%. Bull ring track. Track was dry slick stagger front 1 1/2 rear 1 1/4. Should I run more cross or less than 62% Phantom shows between 63% and 66%?? Thanks

 

[racing promotor]

What are your camber settings

 

[New Racer]

RF-3.0 LF +.25 slight banking. Rear track is 39.25

 

[racing promotor]

If you were to make a cross adjustment for loose on entry, you would add cross, I would add LF pos camber as well take it to .5

 

[New Racer]

Sounds good i will try that. Plan to scale kart again this week. thanks for the input.

 

[jclewis]

https://nogoats.net/wp-content/uploads/2017/01/chassis-tuning.pdf

 

[racing promotor]

If you were to make a cross adjustment for loose on entry, you would add cross, I would add LF pos camber as well take it to .5

Sorry typed it in wrong on camber, you would add more NEG LF camber taking it to zero, cross is correct you would add.

 

[New Racer]

Sorry typed it in wrong on camber, you would add more NEG LF camber taking it to zero, cross is correct you would add.

ok thanks

 

[flattop1]

We always ran zero to .25 Lft frt camber .
You don't have the pill on the right , pulling the axle back . It should be a zero pill there .
A different driving line or technique might be a cure . Loose in was never an issue .

 

[New Racer]

We always ran zero to .25 Lft frt camber .
You don't have the pill on the right , pulling the axle back . It should be a zero pill there .
A different driving line or technique might be a cure . Loose in was never an issue .

Yeah i have the pill on the right on at zero

 

[gcashwell]

Could just drop the air in the RR if it’s more of an issue with the track surface.

 

[XXX#40]

How high is the seat mounted?

 

[PRC01]

Slide your LR hub out 1/4"