martinbuilt clutch question

[jakeman]

is a martinbuilt any good to run on a open clone

 

[bpoirier]

Absolutely, I've run mine on a open predator with no problems.

 

[ABR #69]

If it is setup to run on an open and the engagement is set correctly for the engine, it will absolutely be a great clutch.

Is it a 2 or 3 disc? You should call David and tell him what you have and he will be able to best direct you towards your goal.

 

[jakeman]

it is a 6 spring 2 dics

 

[ABR #69]

Small block clone it will be fine if the engagement is set correctly, you should call David to confirm.

 

[jakeman]

would suggest a different clutch

 

[MartinBuilt Clutches]

Only thing I
would suggest depending on the HP would be a 3 disc MartinBuilt or a bully

 

[kartboy63]

what kind of hp do you need to be at before going to a 3 disk

 

[ABR #69]

They can handle a multitude of HP range. Some have run them on a Stock WKA Animal, all the way up to a jackshaft CR250, or even a CRF450. So If you think you want a 3 disc clutch, it can be made to work on about anything. Maintenance intervals will determine a lot.

 

[jimmy5]

call martin built and talk to them